Schneider Electric ALTIVAR 58 TRX Guia de Instalação descarregar pdf (Página 26)

Chapter 2—Menus VVDED397047USR6/03

Drive Controller Identification Screen 06/2003

Customizing the Macro-Configuration

The drive controller macro-configuration can be customized by

changing the assignment of the inputs and outputs in the 5—I/O

menu. The access locking switch must be in the total unlock, ,

position to customize the configuration. When an I/O assignment is

modified, the macro-configuration screen displays the following:

Drive Controller Identification Screen

This screen can be displayed in each access level. Refer to Figure 11

for the access path. This screen shows the power rating and the

voltage indicated on the drive controller nameplate.

WARNING

MACRO-CONFIGURATION OR PROGRAMMING RESET CAN

CAUSE AN UNINTENDED EQUIPMENT ACTION

• The factory default settings will be substituted for present settings

when the macro-configuration is changed and confirmed.

• The factory default settings may not be compatible with the

application. After changing the macro-configuration, verify that

the factory settings are compatible with application requirements.

Failure to follow these instructions can result in death, serious

injury, or equipment damage.

Figure 10: Customized Macro-Configuration

CUS:Customize

CFG

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 125 126

Sem comentários

Schneider Electric ALTIVAR 58 TRX Guia de Instalação Página 26