Schneider Electric ALTIVAR 58 TRX Guia de Instalação descarregar pdf (Página 19)

VVDED397047USR6/03 Chapter 1—Overview

06/2003 Access Levels

Total Unlock Position – All modes: this level is used during

startup for access to advanced setup parameters.

NOTE: Many parameters cannot be adjusted while the motor is

running.

• You can do everything listed in both access levels above.

• You can also select a different macro-configuration in the Macro-

Configuration menu.

• You can adjust the performance of the motor-drive controller

system, in the 3—Drive menu.

• You can configure the drive controller command to be either from

the terminal strip, the keypad display, or the integrated serial link

using the

4—Control menu.

• You can change the assignments of the inputs and outputs in the

5—I/O menu.

• You can configure motor protection, drive controller protection,

and response after a fault has occurred in the 6—Fault menu.

• You can save the drive controller configurations, recall them from

memory, return to factory settings, or protect your configuration in

the 7—Files menu.

• You can adjust the parameters pertaining to communication in the

8—Communication menu, if a communication card is installed.

• You can access the 8—Application menu, if a customer

application card is installed.

Menu Hierarchy

Figure 6 shows the menus as they appear on the display when the

access locking switch is in the total unlock position .

NOTE: If an access code (password) has already been programmed,

certain menus may not be modifiable, or may not be visible. In this

case refer to “Access Code” on page 92 for how to enter the access

code.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 125 126

Sem comentários

Schneider Electric ALTIVAR 58 TRX Guia de Instalação Página 19