Schneider Electric Altivar 58 VW3-A58101 Manual do Utilizador descarregar pdf (Página 23)

VVDED397047US R8/01 ALTIVAR



58 Keypad Display

08/01 Chapter 2 — Menus

Modification of the macro-configuration requires two confirmations since

it automatically changes the function assignments. When a change to the

macro-configuration is requested the following screen is displayed:

Figure 9: Macro-Configuration Validation

UNINTENDED EQUIPMENT OPERATION

LI1 has priority:

• If LI1 is closed while LI2 is active, the controller will respond to

LI1.

• If the LI1 input is lost while LI2 is active, the controller will

respond to LI2 and reverse directions.

The logic inputs must be programmed appropriately for the

application to prevent the motor from spinning in an unintended

direction.

Failure to follow this instruction can result in death or serious

injury.

WARNING

Validate? ENT/ESC

CHG

Press ENT to proceed with change

Press ESC to return to the previous configuration

MACRO-CONFIGURATION OR PROGRAMMING RESET CAN

CAUSE AN UNINTENDED EQUIPMENT ACTION

• Factory default settings will be substituted for present settings

when the macro-configuration is changed and confirmed.

• Factory default settings may not be compatible with the

application. After changing the macro-configuration, verify that

the factory settings are compatible with application requirements.

Failure to follow these instructions can result in death, serious

injury, or equipment damage.

WARNING

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 111 112

Sem comentários

Schneider Electric Altivar 58 VW3-A58101 Manual do Utilizador Página 23