Schneider Electric Modbus Plus Network Bridge Multiplexer none Manual do Utilizador descarregar pdf (Página 18)

ProWORX NxT User’s Guide

52 l Performing a network scan

Performing a network scan

The Network Scan function finds controllers, bridges, bridge multiplexers,

and other devices attached to Modbus and Modbus Plus networks. NxT

displays the devices it finds by their address number and also shows their

type, mode, and status.

Ø To scan for devices on your network:

1. In the Select Device window, click Net Scan. NxT displays the

Network Scan window and begins to search for devices.

You do not have to wait for NxT to interrogate each device address.

When NxT finds and displays the device you want, click Cancel to

stop the scan. To rescan the network, click Scan.

2. Double-click the graphic of a device to select it or click the graphic,

then click OK.

Ÿ If you selected Modbus Plus or Ethernet Gateway in the

Communications Setup dialog box, selecting a bridge or bridge

multiplexer scans the network attached to that device.

Select a device, then click OK.

To start a scan at a particular

point, type a partial routing path

here, then press ENTER. Click

Prev LAN to scan for devices

on the Local Area Network

(LAN) one level above the cur-

rent one.

Click Print to print out the result

of a network scan.

1 2 ... 13 14 15 16 17 18 19 20

Sem comentários

Schneider Electric Modbus Plus Network Bridge Multiplexer none Manual do Utilizador Página 18