Schneider Electric Modbus Plus Network Bridge Multiplexer none Manual do Utilizador descarregar pdf (Página 13)

Chapter 3 Connecting to a Controller

Selecting a device on the network l 47

Ø To select a device with a direct connection to a controller or network:

1. Do one of the following:

Ÿ From the ProWORXNxT Title Screen, on the Controller menu,

click Select Device.

Ÿ From the Network Editor, on the Controller menu, click Change

Device.

NxT displays the Select Device window.

2. In the Device field, type the address of a controller.

For Type

Modbus A Modbus address (1 to 247) for a controller on the local

network.

…a one-address Modbus “routing path”, if your Modbus

network is connected to a Modbus Plus network through a

controller in Bridge Mode or a Bridge Multiplexer. The

controller or BM85 interprets the Modbus address as a

routing path using its internal Address Map or Implicit

Attach Addressing.

Modbus Plus A Modbus Plus address (1 to 64) for a controller on the local

network.

…a five-address Modbus Plus routing path to a device on

another network. Type the address of the bridge first,

followed by addresses for additional Modbus Plus

networks, Modbus Plus devices on those networks, or

Modbus devices bridged to the Modbus Plus networks.

Separate the addresses in the routing path with commas (for

example: 10, 3, 21, 0, 0).

Type the controller’s address

here.

Click to see which devices

are currently available (ex-

cept when using

TCP/IP networking).

Click to select a database.

This title and some options

change depending on your

communication system.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Schneider Electric Modbus Plus Network Bridge Multiplexer none Manual do Utilizador Página 13