Schneider Electric Multi-Loader Especificações descarregar pdf (Página 11)

Introduction (continued)

Altivar

variable speed drives

An optimum solution

The Altivar

12 range of variable speed drives extends across a range of motor

power ratings from 0.18 kW to 4 kW on three types of power supply: Two standard

versions are available:

Drive with heatsink for normal environments and fan-cooled enclosure:

v 100 to 120 V single-phase, 0.18 kW to 0.75 kW (ATV12HpppF1)

v 200 to 240 V single-phase, 0.18 kW to 2.2 kW (ATV12HpppM2)

v 200 to 240 V three-phase, 0.18 kW to 4 kW (ATV12HpppM3)

Drive on a base plate for mounting on the machine frame; the frame surface area

should allow heat to dissipate:

v 100 to 120 V single-phase, 0.18 kW to 0.37 kW (ATV12H018F1, P037F1)

v 200 to 240 V single-phase, 0.18 kW to 0.75 kW (ATV12H018M2, PpppM2)

v 200 to 240 V three-phase, 0.18 kW to 4 kW (ATV12H018M3, PpppM3)

Note: The Altivar 12 drive output voltage is 200 to 240 V three-phase, regardless of the type of

drive line supply.

The Altivar 12 drive utilizes standard Modbus communication protocol, and can be

accessed via the RJ45 connector located on the underside of the drive 4.

The entire range conforms to international standards IEC/EN 61800-5-1 and

IEC/EN61800-3,isUL,CSA,C-Tick,NOM,GOSTcertiedandhasbeendeveloped

to meet the requirements of directives regarding the protection of the environment

(RoHS, WEEE) as well as those of European Directives to obtain the e mark.

Electromagnetic compatibility (EMC)

TheintegrationofalevelC1EMClterinATV12ppppM2 drives and the handling of

EMC simplify installation and make it very inexpensive to bring the device into

conformity to obtain the e mark.

ThisEMCltercanbedisconnectedviaaninternalswitch6.

ATV12ppppF1 and ATV12ppppM3drivesaredesignedwithoutanEMClter.Filters

are available as an option and can be installed by the customer to reduce

the level of emissions (see page 16).

External accessories and options

External accessories and options can be used with Altivar 12 drives:

EMC conformity kits, plates for direct mounting on 35 mm DIN rails, etc.

Braking units combined with a braking resistor, motor chokes, additional EMC input

lters,etc.

Dialog and conguration tools

Human/Machine Interface (HMI)

The 4-digit display 1 can be used to display states and faults, access parameters

and modify them via the navigation button 2.

The RUN and STOP buttons 3 can be made accessible on the front panel by removing

the blanking plate 5fromthedoor;theymustbeconguredinordertobeactive.

Simple Loader and Multi-Loader conguration tools

TheSimpleLoadertoolenablesonepowered-updrive'scongurationtobe

duplicated on another powered-up drive.

TheMulti-LoadertoolenablescongurationsfromaPCordrivetobecopiedand

duplicated on another drive; the drives do not need to be powered up.

SoMove

™

setup software

TheSoMovesetupsoftwarecanbeusedwiththeAltivar12driveforconguration,

adjustment,debugging(usingtheOscilloscopefunction)andmaintenance,justasit

can for all other Schneider Electric variable speed drives and starters. It can also be

used to customize the integrated display terminal menus. It can be used with a direct

connection or a Bluetooth

wireless connection.

Remote display terminal

The Altivar 12 drive can be connected to a remote display terminal, available as an

option. This terminal can be mounted on an enclosure door with IP 54 or IP 65

degree of protection. The maximum operating temperature is 50°C. It provides

access to the same functions as the Human/Machine Interface.

Specications:

page 10

References:

page 14

Dimensions:

page 18

Connections:

page 22

Functions:

page 26

Drive with heatsink

ATV12H075M2

Drive on base plate

ATV12P075M2

Remote terminal

with cover closed

Remote terminal with cover

open: RUN, FWD/REV and

STOP buttons accessible

5 4

ATV12H075M2 with door on

front panel open

Multi-Loader

conguration tool

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Comentários a estes Manuais

Sem comentários

Schneider Electric Multi-Loader Especificações Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Schneider Electric Multi-Loader