Schneider Electric Magelis XBT GT Especificações

35010372.12www.schneider-electric.com35010372 10/2010Magelis XBT GT, XBT GK, XBT GHHardware Guide10/2010

10 35010372 10/2010

100 35010372 10/2010XBT GK2000 SeriesSide XBT GK2000 series Part IdentificationFrontPart DescriptionA Display: displays user created screens and remot

35010372 10/2010 101Side XBT GK2000 series Part IdentificationRear

102 35010372 10/2010Left and RightBottomPart DescriptionH Expansion unit interface (EXT1): connects expansion units with communication features.I Ethe

35010372 10/2010 103K CF card access lamp: z Green ON: the CF card is inserted and the cover is closed, or the CF card is being accessed.z Green OFF:

104 35010372 10/2010XBT GK5330Side XBT GK5330 Part IdentificationFrontPart DescriptionA Display: displays user created screens and remote equipment va

35010372 10/2010 105Side XBT GK5330 Part IdentificationRear

106 35010372 10/2010Left and RightBottomPart DescriptionH Expansion unit interface (EXT1): connects expansion units with communication features.I Expa

35010372 10/2010 107L CF card cover : The CF card socket and DIP switches are located in the CF card cover (they are accessible when the card cover is

108 35010372 10/2010XBT GH2460Side XBT GH2460 Part IdentificationFrontPart DescriptionA Display: displays user created screens and remote equipment va

35010372 10/2010 109Side XBT GH2460 Part IdentificationRearRightCF Card Cover OpenHILPJKMMNNOQRGRIVSTU

35010372 10/2010 11I35010372 10/2010XBTGT, XBTGK, and XBTGH PanelsOverviewThis part presents XBT GT, XBT GK, and XBT GH Panels.What's in this P

110 35010372 10/2010Part DescriptionH Key Switch: Turning the key turns ON/OFF the XBT GH unit power supply.I CF card cover: The CF card socket and DI

35010372 10/2010 111Terminal Configuration SwitchesIntroductionThe RS485 line polarization selector switch is available on all XBT GT and XBT GK serie

112 35010372 10/2010Location of CF Card DIP SwitchesOn XBT GH, XBT GK, and XBT GT2000 and higher units (except XBT GT2110), the CF card DIP switches a

35010372 10/2010 113XBT GHDip SwitchFunction ON OFF1 Controls downloading from CF card. The application downloads from the CF Card and transfers into

114 35010372 10/2010The following diagram describes in detail the way the unit behaves in BOOT mode, based on the DIP switch settings and the CF card

35010372 10/2010 115The following diagram describes in detail the way the unit behaves in RUN mode, based on the DIP switch settings and the CF card s

116 35010372 10/20103.5 DimensionsOverviewThis section presents all the dimensions of XBT GT, XBT GK, and XBT GH units.What's in this Section?Thi

35010372 10/2010 117XBT GT1000 Series Dimensions

118 35010372 10/2010Installation with Spring ClipsNOTE: XBT Z3002 spring clip fasteners must be ordered separately.

35010372 10/2010 119Installation with Screw Fasteners

12 35010372 10/2010

120 35010372 10/2010XBT GT1005 Series DimensionsThe following illustrations show the dimensions for the XBT GT1105, 1135, and 1335 panels.

35010372 10/2010 121Dimensions with Cables

122 35010372 10/2010Installation with Spring ClipsNOTE: XBT Z3002 spring clip fasteners must be ordered separately.

35010372 10/2010 123Installation with Screw Fasteners

124 35010372 10/2010XBT GT2000 Series DimensionsThe following four illustrations show the dimensions for the XBT GT2110, 2120, 2130, 2220, 2330, and

35010372 10/2010 125Dimensions with Cables

126 35010372 10/2010Installation with Spring ClipsNOTE: Spring clip fasteners must be ordered separately (ref. XBT Z3002)

35010372 10/2010 127Installation with Screw Fasteners

128 35010372 10/2010Dimensions of XBT GT2430155.5167.5559.56.606.120.202.341355.321234.84FrontRight SideTo pmminch

35010372 10/2010 129Dimensions of XBT GT2430 with Cables1174100724223450.432.913.942.831.650.911.77BackTo pmminch

35010372 10/2010 13135010372 10/2010XBTGT, XBTGK, and XBTGH PanelsOverviewThis chapter presents series of XBT GT, XBT GK, and XBT GH Panels and conn

130 35010372 10/2010Installation of XBT GT2430 with Spring ClipsNOTE: Spring clip fasteners must be ordered separately (ref. XBT Z3002)NOTE: Mounting

35010372 10/2010 131Installation of XBT GT2430 with Screw Fasteners167.56.601355.31144.45.291234.84134.45.2950.2059.52.34FrontRight SideTop

132 35010372 10/2010XBT GT4000 Series Dimensions

35010372 10/2010 133Dimensions with Cables

134 35010372 10/2010Installation with Spring ClipsNOTE: XBT Z3002 spring clip fasteners must be ordered separately.

35010372 10/2010 135Installation with Screw Fasteners

136 35010372 10/2010XBT GT5000 Series DimensionsDimensions of XBT GT5230

35010372 10/2010 137Dimensions of XBT GT5230 with Cables

138 35010372 10/2010Installation of XBT GT5230 with Spring ClipsNOTE: XBT Z3002 spring clip fasteners must be ordered separately.

35010372 10/2010 139Installation of XBT GT5230 with Screw Fasteners

14 35010372 10/2010XBT GT, GK, and GH Series of PanelsIntroductionThe following presents the XBT GT touchscreen, XBT GK keypad, and XBT GH hand held

140 35010372 10/2010Dimensions of XBT GT5330/5340/5430

35010372 10/2010 141Dimensions of XBT GT5330/5340/5430 with Cables

142 35010372 10/2010Installation of XBT GT5330/5340/5430 with Spring ClipsNOTE: XBT Z3002 spring clip fasteners must be ordered separately.

35010372 10/2010 143Installation of XBT GT5330/5340/5430 with Screw Fasteners

144 35010372 10/2010XBT GT6000 Series Dimensions

35010372 10/2010 145Dimensions with Cables

146 35010372 10/2010Installation with Spring ClipsNOTE: XBT Z3002 spring clip fasteners must be ordered separately.

35010372 10/2010 147Installation with Screw Fasteners

148 35010372 10/2010XBT GT7000 Series Dimensions

35010372 10/2010 149Dimensions with Cables

35010372 10/2010 15z STN: Super-Twisted Nematic, also known as passive matrix.z TFT: Thin Film Transistors, also known as active matrix.XBT GK Part Nu

150 35010372 10/2010Installation with Spring ClipsNOTE: XBT Z3002 spring clip fasteners have to be ordered separately.

35010372 10/2010 151Installation with Screw Fasteners

152 35010372 10/2010XBT GK2000 Series DimensionsThe following illustrations show dimensions for the XBT GK2120 and 2330 keypad panels.

35010372 10/2010 153Dimensions with CablesNOTE: The XBT GK2120 does not support Ethernet.

154 35010372 10/2010Installation with Spring Clips

35010372 10/2010 155Installation with Screw FastenersNOTE: XBT ZGFIX screw installation fasteners must be ordered separately.

156 35010372 10/2010XBT GK5330 DimensionsDimensions of XBT GK5330

35010372 10/2010 157Dimensions of XBT GK5330 with Cables

158 35010372 10/2010Installation of XBT GK5330 with Spring Clips

35010372 10/2010 159Installation of XBT GK5330 with Screw FastenersNOTE: XBT ZGFIX screw installation fasteners must be ordered separately.

16 35010372 10/2010XBT GH Part NumbersThe following table presents the different XBT GH products: z TFT: Thin Film Transistors also known as active ma

160 35010372 10/2010XBT GH2000 Series DimensionsDimensions of XBT GH2460The following illustrations show dimensions for the XBT GH2460 panels. TopFron

35010372 10/2010 161Dimensions of the Emergency Switch Guardmm65.081.53.211.7745.02.56in.

162 35010372 10/2010Panel Cut-out DimensionInserting a XBT GT/XBT GKCreate a panel cut-out and insert the unit into the panel from the front. The foll

35010372 10/2010 163XBT GT5330XBT GT5340XBT GT5430 +1259 - 0 +1201 - 0 +0.0410.20 - 0 +0.047.91 - 01.6 to 10.0 0.06

164 35010372 10/2010Installation FastenersIntroductionTwo types of fasteners can be used to mount the XBT GT and XBT GK ranges:z screw installation fa

35010372 10/2010 165Spring Clip DimensionsScrew Installation Fasteners Dimensions

166 35010372 10/2010

35010372 10/2010 167435010372 10/2010Installation and WiringOverviewThis chapter describes the installation procedures and the wiring principles for

168 35010372 10/20104.1 InstallationInstallation ProceduresIntroductionBefore installing the unit into a cabinet or panel, read the instructions below

35010372 10/2010 1693 Do not insert the joint of the installation gasket in the corner of the unit. Insert the joint only in the straight sections of

35010372 10/2010 17WARNINGLOSS OF CONTROL z The designer of any control scheme must consider the potential failure modes of control paths and, for cer

170 35010372 10/2010Panel setup procedureStage Description1 Check that the installation panel or cabinet’s surface is flat, in good condition and has

35010372 10/2010 171Installation with Spring ClipsNOTE: Use the installation gasket to absorb vibration and to repel water.7 When installing the unit

172 35010372 10/2010 Step Action1 Place the unit on a clean and level surface with the display panel facing downward.2 Check that the unit’s installat

35010372 10/2010 173NOTE: Spring clips fasteners are required for NEMA Type 4 protection for XBT GK series.Installation with Screw Fasteners6 Lock the

174 35010372 10/20104 Insert the unit (example from the XBT GT1000 series) into the panel cut:5 Insert the installation fasteners into the unit‘s inse

35010372 10/2010 175NOTE: Screw installation fasteners are required for NEMA Type 4 protection for XBT GT series.7 Use a Phillips screwdriver to tight

176 35010372 10/20104.2 Wiring PrinciplesOverviewThis section presents XBT GT and XBT GK wiring principles.What's in this Section?This section co

35010372 10/2010 177Connecting the Power CordIntroductionFollow these instructions when supplying power to the unit.NOTE: z When the frame ground (FG

178 35010372 10/2010Power Plug Illustration1 - Power plug for XBT GT1000/1005/2000/4000 series and XBT GK2000 series2 - Power plug for XBT GT5000/6000

35010372 10/2010 179Example of Power Cord’s ConnectionThe following illustration displays a connection’s example of the power cord on the XBT GT1000

18 35010372 10/2010Handling the LCD panelThe following characteristics are specific to the LCD unit and are considered normal behavior:z LCD screen ma

180 35010372 10/2010Connecting the Power SupplyPrecautionsz Connect the power cord to the power connector on the side of the unit using the power plug

35010372 10/2010 181Power Supply ConnectionsFor ease of maintenance, use the following optional connection diagram to set up your power supply connec

182 35010372 10/2010GroundingTake the following precautions for grounding the unit.Exclusive GroundingConnect the frame ground (FG) terminal on the po

35010372 10/2010 183If exclusive grounding is not possible, use a common connection point.

184 35010372 10/2010Input/Output Line PlacementIntroductionInput and output signal lines must be separated from the power supply cables for operating

35010372 10/2010 1854.3 Tool Port ConnectorOverviewThis section describes the Tool Port Connector Installation.What's in this Section?This sectio

186 35010372 10/2010Making Tool Port ConnectionsIntroductionThe XBTZG915 and XBTZG925 data transfer cables can be attached to the tool port on XBT GT1

35010372 10/2010 187USB Driver InstallationIntroductionUse the USB data transfer cable to download data from a PC running Vijeo Designer to the unit.

188 35010372 10/2010Post-Installation CheckExecute the following check after installation:Changing the COM Port NumberThe COM port number 3 is assigne

35010372 10/2010 189TroubleshootingUninstalling the USB DriverUnplug the USB data transfer cable from the PC and double-click on the CD-ROM’s DRemover

35010372 10/2010 19Package ContentsMake sure all applicable items listed here are present in your unit’s package:1a or 1b or 1c or 1d Human Machine In

190 35010372 10/20104.4 Ethernet Cable ConnectorPresentationIntroductionThe XBT GT series (except for the XBT GT1100/1105/2110/2120/2220 models) and

35010372 10/2010 191Ethernet Cable ConnectorThe following illustration displays the location of the RJ45 Ethernet cable connector:XBT GT1130BottomXBT

192 35010372 10/2010NOTE: Ethernet networks should be installed by a trained and qualified person.1:1 connections should be made with a hub or a switc

35010372 10/2010 1934.5 CF CardCF Card Installation and RemovalIntroductionCF Cards can be used store the following types of data:z Historical Dataz R

194 35010372 10/2010PrecautionsWhen using the unit and a CF card, follow the precautions below:z Prior to inserting or removing a CF card, be sure tha

35010372 10/2010 195Inserting the CF CardUse the following steps to insert the CF card.Step Action1 Slide the CF card cover in the direction shown her

196 35010372 10/2010Removing the CF CardSimply reverse the steps shown in the previous procedure.Prior to removing the CF card, confirm that the CF Ca

35010372 10/2010 1974.6 USB PortOverviewThis section presents the USB port.What's in this Section?This section contains the following topics:Topi

198 35010372 10/2010Important Considerations When Using the USB PortIntroductionThe following units have a USB port:z XBT GT1005 seriesz XBT GT2000 se

35010372 10/2010 199USB Data Transfer Cable (XBT ZG935) - USB Driver InstallationImportant informationFollow the procedure described below to prevent

2 35010372 10/2010 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of

20 35010372 10/20108 USB Holder, 1 set (for XBT GT1005/4000/5000/6000/7000 series)9 AUX Connector (for XBT GT4000/5000/6000/7000 series, XBT GK5000

200 35010372 10/2010Post-Installation CheckPerform the following check after installation:TroubleshootingUninstalling the USB DriverStep Action1 On t

35010372 10/2010 201USB ClampIntroductionWhen using a USB device, you can attach a USB clamp to the USB interface on the side of the unit to prevent t

202 35010372 10/2010Attaching the USB Clamp to the XBT GT SeriesStep Action1 Insert the USB clamp into the slot in front of the unit’s USB port and pu

35010372 10/2010 203Attaching the USB Clamp to the XBT GK SeriesStep Action1 Attach the USB clamp to the USB Host Interface on the main unit. Insert t

204 35010372 10/2010Releasing the USB Clamp on the XBT GT SeriesLower the tab and lift the collar to release the plug.

35010372 10/2010 205Removing the USB Clamp on the XBT GK Series Step Action1 Release the USB collar and remove it.2 Remove the USB cable.3 To remove t

206 35010372 10/2010USB HolderIntroductionWhen using a USB device, you can attach a USB holder to the USB interface on the side of the unit to prevent

35010372 10/2010 207Attaching the USB HolderStep Action1 Attach the USB holder to the USB Host Interface on the main unit. Hook the upper pick of the

208 35010372 10/20102 Insert the USB cable into the USB host interface.Step Action

35010372 10/2010 2093 Attach the USB cover to fix the USB cable in place. Insert the USB cover into the tab of the USB holder. If you are installing a

35010372 10/2010 21Certifications and StandardsAgency CertificationsSchneider Electric submitted this product for independent testing and qualificatio

210 35010372 10/2010Removing the USB Holder Lift up the tab of the USB holder and then remove the USB cover.

35010372 10/2010 2114.7 AUX ConnectorAUX ConnectorIntroductionYou can connect the cable to the AUX connector to perform an external reset input or a s

212 35010372 10/20104 Insert the cable into the circular-shaped hole and pull out the driver. The cable is then fixed.5 Insert the AUX connector into

35010372 10/2010 2134.8 Cable ConnectorAttaching the Cable Connector to the XBT GHIntroductionThe functionality of XBT GH units, such as the use of ad

214 35010372 10/20102 Turn the cable connector so that the surface marked with a triangle faces up. Insert the cable connector into the XBT GH connect

35010372 10/2010 215Removing the Cable ConnectorUse the following steps to detach the cable connector from the XBT GH connector.Step Action1 Turn the

216 35010372 10/20104.9 Emergency Switch GuardAttaching the Emergency Switch Guard to the XBT GHIntroductionInstall the emergency switch guard to a XB

35010372 10/2010 2173 Align the three screw holes of the emergency switch guard with the screw holes of the XBT GH unit. Fasten the two points in the

218 35010372 10/2010

35010372 10/2010 219II35010372 10/2010Setting and DebuggingOverviewThis part describes the settings available on the target machine as well as how t

22 35010372 10/2010Compliance Standards for XBT GT and XBT GK SeriesEurope:z Directive 2006/95/EC (Low voltage)z Directive 2004/108/EC (EMC).The units

220 35010372 10/2010

35010372 10/2010 221535010372 10/2010Settings5.1 SettingsOverviewThis section describes the settings on all XBT GT, XBT GK, and XBT GH units.What&a

222 35010372 10/2010Types of SettingsIntroductionYou can use the Settings menu to configure the unit.Depending on how you use your XBT GT, XBT GK, or

35010372 10/2010 223Offline SettingsIntroductionThe offline settings cannot be changed while a user application is running.Offline TabSee the Vijeo De

224 35010372 10/2010Changing Backlight ControlOptionConfigure the COM1 port as a power supply.Step Action1 In the Settings menu, touch the Offline tab

35010372 10/2010 225System SettingsIntroductionYou can change system settings while the user application is still running.System tabSee the Vijeo Desi

226 35010372 10/2010Displaying Version InformationDisplaying Memory StatisticsBrightness/Contrast ControlOptionIn some projects and in some environmen

35010372 10/2010 227635010372 10/2010TroubleshootingOverviewThis chapter describes how to find and resolve problems with the XBT GT, XBT GK and the

228 35010372 10/2010Troubleshooting ChecklistsIntroductionWhen a problem occurs, to go through the checklist and follow the instructions given.Here ar

35010372 10/2010 229Connected Equipment Cannot be UsedIf the unit does not communicate correctly with connected equipment, perform the following che

35010372 10/2010 23UL 1604 Conditions of Acceptability and Handling Considerations for XBT GT and XBT GK SeriesThe XBT GT and XBT GK series have been

230 35010372 10/2010Target beeps when powered ONIf the target beeps continually when you turn ON the power supply, then the system files on the unit h

35010372 10/2010 231Cannot change the Date or TimeIf you cannot change the date or time:. NOTE: The lifetime of the backup battery depends on the ambi

232 35010372 10/2010Self Test ListIntroductionThe XBT GT, XBT GK, and XBT GH units are equipped with a number of diagnostic features that can be used

35010372 10/2010 233Wiring for COM 1, COM 2 testsWhen testing the serial port, depending on which port and which communication format you are testing,

234 35010372 10/2010

35010372 10/2010 235735010372 10/2010MaintenanceOverviewThis chapter explains how to maintain your XBT GT, XBT GK, and XBT GH.What's in this Ch

236 35010372 10/2010Regular CleaningCleaning the displayWhen the surface or the frame of the display gets dirty, soak a soft cloth in water with a neu

35010372 10/2010 237Inserting the GasketThe gasket must be inserted correctly into the groove to comply with IP65.The upper surface of the gasket shou

238 35010372 10/2010Periodic Check PointsOperation Environmentz The operating temperature should be within the allowable range (0 ° C to 50 ° C) (32 °

35010372 10/2010 239Replacing the BacklightIntroductionThe following maintenance applies only to the XBT GT5000/6000/7000 series units. There are no s

24 35010372 10/2010

240 35010372 10/2010How to Determine if the Backlight is Burned OutIf your unit's backlight suddenly turns OFF, use the following steps to determ

35010372 10/2010 241CBAIndex35010372 10/2010IndexSymbols PeripheralsEdit Mode, 26Run Mode, 28, 30AAccessories, 32AUX Connector, 211CCable ConnectorI

Index24235010372 10/2010Llabelinsert label XBT GH, 61insert label XBT GK, 61inserting insert labels, 61printing insert labels, 61MMaintenanceCheck poi

Index35010372 10/2010 243Specifications3-Position Switch, 59Alphanumeric Keys, 57COM, 68COM1, 65, 68COM2, 66, 72Cursor Keys, 56Display, 47Electrical,

Index24435010372 10/2010XBT GT1135Dimensions, 120Offline Settings, 223Panel Cut-out Dimensions, 162Parts Identification, 79System Settings, 225XBT GT1

Index35010372 10/2010 245XBT GT5340Dimensions, 140Offline Settings, 223Panel Cut-out Dimensions, 162Parts Identification, 91System Settings, 225XBT GT

Index24635010372 10/2010

35010372 10/2010 25235010372 10/2010Device ConnectivityIntroductionThis chapter presents the equipment connectable to each XBT GT, XBT GK, and XBT G

26 35010372 10/2010System DesignIntroductionThe following diagrams represent the main selection of equipment connectable to the units.XBT GT1000 Serie

35010372 10/2010 27XBT GT1000 Series Run Mode Peripherals(1) Not available on XBT GT1100

28 35010372 10/2010XBT GT1005/2000/4000/5000/6000/7000 and XBT GK2000/5000 Series Run Mode Peripherals1 Ethernet network connection (not available on

35010372 10/2010 293 USB hub (commercial type)4 Serial printer5 PLC6 Parallel printer (printer function validated with EPSON and HP models; detail

35010372 10/2010 3Table of ContentsSafety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7About the Book . . . . . . . . .

30 35010372 10/2010XBT GH Series Run Mode Peripherals1 Ethernet network connection (not available on XBT GH XBT GT1105/2110/2120/2220 and XBT GK2120)

35010372 10/2010 3111 Flashing light (not available on XBT GT1005/2000 series, and XBT GK2000 series)12 Microphone (available on XBT GTxx40 products

32 35010372 10/2010AccessoriesSerial Interface ItemsProduct Number Product name Description XBT GT/GK/GH seriesXBT Z915 Cable Connects COM on XBT GH,

35010372 10/2010 33XBT Z9711 XBT Z cable Connects COM1, COM on XBT GH, port with XBTZ adapter to Momentum PLCAllXBT Z908 XBT Z cable Connects COM1, CO

34 35010372 10/2010XBT GT Tool Port ItemsXBT ZG9740 XBT Z cable Connects COM1, COM on XBT GH, to Omron PLC Sysmac Link seriesAll XBT GK models, XBT GT

35010372 10/2010 35USB Interface ItemsSoftwareProduct Number Product name Description XBT GT/GK/GH seriesXBT ZG935 Cable Connects the panel to a perso

36 35010372 10/2010Screen Protection SheetsSpring Clip FastenersCommunication ModulesCompact Flash Memory Card InterfaceThe Compact Flash memory card

35010372 10/2010 37z MPCYN00CFE00N (512 Mb)z MPCYN00CF100N (1 Gb)Maintenance OptionsXBT GH AccessoriesProduct Number Product name Description XBT GT/G

38 35010372 10/2010

35010372 10/2010 39335010372 10/2010SpecificationsOverviewThis chapter presents the XBT GT, XBT GK, and XBT GH specifications:What's in this C

4 35010372 10/2010XBT GT5000 Series Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136XBT GT6000 Series Dimensions . . . .

40 35010372 10/20103.1 General SpecificationsOverviewThis section presents XBT GT, XBT GK, and XBT GH general specifications:What's in this Sect

35010372 10/2010 41Electrical Specifications NOTE: For in-rush current, the FWHM (full-width, half maximum) value is approximately 50 μs. (When exceed

42 35010372 10/2010Environmental Specifications Specification ValueAmbient operating temperature (cabinet interior & panel face)0 ° C to +40 ° C (

35010372 10/2010 43NOTE: (1) For XBT GT and XBT GK, the LCD display’s contrast STN color and monochrome models (see page 47) may decrease when disp

44 35010372 10/2010Structural Specifications Specification XBT GT1000/1005 seriesXBT GT2000 series XBT GT4000 seriesGrounding Observe local codes and

35010372 10/2010 45NOTE: (1) The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the standards sho

46 35010372 10/20103.2 Functional SpecificationsOverviewThis section presents the XBT GT, XBG GK, and XBT GH functional specifications of the display,

35010372 10/2010 47Display SpecificationsSTN DisplaysSpecification XBT GT1100XBT GT1130XBT GT1105XBT GT1135XBT GT2110 XBT GT2120XBT GT2130XBT GK2120X

48 35010372 10/2010NOTE: (1) Among backlight units there may be slight variations in illumination color, however, this does not affect the performance

35010372 10/2010 49Back-light (1)CFL Backlight (Service life: 50,000 h. at 25° C and continuous operation [half of original brightness]) XBT GT2430, X

35010372 10/2010 5Chapter 7 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235Regular Cleaning. . . . . . . . . .

50 35010372 10/2010NOTE: (1) Among backlight units there may be slight variations in illumination color, however, this does not effect the performance

35010372 10/2010 51XBT GT2330 60 65 35 40 60 65 60 65 degrees CR≥5422cd/m2XBT GT2430 - 80 - 70 - 80 - 80 degrees CR≥5400cd/m2XBT GT2930 - 70 - 50 - 70

52 35010372 10/2010The definition of viewing angle:

35010372 10/2010 53Memory, Clock, and Touch PanelMemoryClockVariations in operating conditions and battery life can cause a clock error from -380 to +

54 35010372 10/2010Touch Panel and Function KeysSpecification XBT GT1000 XBT GT1005/2000/4000/5000/6000/7000 seriesTouch panel resolution 8 x 6 matrix

35010372 10/2010 55XBT GK/GH Function Keys 1 Static Function Keys2 Dynamic Function KeysNOTE: Static keys (Fi) can be customized by printing text or

56 35010372 10/2010Industrial Pointer, Keypads, Switches and LEDsIntroductionXBT GK and XBT GH units contain several features in addition to the touch

35010372 10/2010 57Alphanumeric KeysClr (Shift + Back Space) Deletes everything in the active data input field.System (Shift + Esc) To open the system

58 35010372 10/2010Fine TuningFor numerical values in a data input field, use the Increment and Decrement keys on the edition keypad to increase or de

35010372 10/2010 59Operation SwitchXBT GH units only accept touch panel and function key inputs when the operation switch is pressed.Emergency SwitchT

6 35010372 10/2010

60 35010372 10/2010Be aware of the maximum and minimum permitted current load of the Emergency Stop button, the Key Switch, and the Enable Switch. Inc

35010372 10/2010 61Insert Labels XBT GK and XBT GHOverviewXBT GKs and XBT GHs are delivered with an insert label sheet providing the following label t

62 35010372 10/2010Graphical Representation of Correctly Inserting Labels into the XBT GKThe following describes the procedures of inserting insert l

35010372 10/2010 63Inserting Labels into the XBT GKGraphical Representation of Correctly Inserting Labels into the XBT GH The following describes the

64 35010372 10/2010Inserting Labels into the XBT GHStep Action1 Press the pre-cut insert label of your choice out of the insert label sheet.2 Take the

35010372 10/2010 65Serial InterfaceIntroductionAll XBT GT, XBT GK, and XBT GH displays are provided with a serial interface and tool port or USB Inte

66 35010372 10/2010Serial Interface COM2The following table lists the serial interface COM2 of XBT GT2000/4000/5000/6000/7000 and XBT GK series units.

35010372 10/2010 673.3 Interface SpecificationsOverviewThis section presents the interface specifications of the units.What's in this Section?Thi

68 35010372 10/2010Specifications of Serial Interface COM1/COMIntroductionThis interface is used to connect:z XBT GT1000/1005 series to remote equipme

35010372 10/2010 69XBT GT1000/1005 Series Serial Interface COM1This interface is used to connect a RS-232C/RS485 serial cable. An RJ45 8-pin plug conn

35010372 10/2010 7§Safety InformationImportant InformationNOTICERead these instructions carefully, and look at the equipment to become familiar with t

70 35010372 10/2010XBT GT2000/4000/5000/6000/7000, XBT GK series Serial Interface COM1, XBT GH COMThe following table describes the serial interface w

35010372 10/2010 71Any excessive weight or stress on communication cables may cause an equipment’s disconnection.CAUTIONLOSS OF POWER z All connection

72 35010372 10/2010Specifications of Serial Interface COM2IntroductionThis interface is used to connect the XBT GT2000/4000/5000/6000/7000 and XBT GK

35010372 10/2010 73Other InterfacesEthernet InterfaceThe Ethernet Interface is used for the following units:z XBT GT1130z XBT GT1135z XBT GT1335z XBT

74 35010372 10/2010USB InterfaceThe USB Interface accepts a USB data transfer cable and is used for the following units:z XBT GT1005 seriesz XBT GT20

35010372 10/2010 75This interface is used for external reset, alarm output, buzzer output or sound output.Input CircuitPin Connection Pin Signal Name

76 35010372 10/2010Output Circuit

35010372 10/2010 773.4 Part Numbers and FunctionsOverviewThis section presents the Part Number and Functions of XBT GT, and XBT GH units.What's i

78 35010372 10/2010Parts Identification and FunctionsXBT GT1100 and XBT GT1130Side XBT GT1100 XBT GT1130FrontRearBottomPart DescriptionA Display: disp

35010372 10/2010 79XBT GT1005 SeriesC Status LEDD Power input Terminal block: connects the XBT GT power cable’s input and ground wires to the XBT GT.E

8 35010372 10/2010PLEASE NOTEElectrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibili

80 35010372 10/2010RearBottomPart DescriptionA Display: displays user created screens and remote equipment variables.B Touch panel: performs screen ch

35010372 10/2010 81XBT GT2000 SeriesG RS485 Line Polarization Selector Switch.H Ethernet interface (LAN) (10Base-T/100Base-TX) (except XBT GT1105): RJ

82 35010372 10/2010Left and RightCF Card Cover OpenPart DescriptionA Display: displays user created screens and remote equipment variables.B Touch pan

35010372 10/2010 83F Ethernet interface (10Base-T/100Base-TX) (except XBT GT2110/2120): RJ-45 connector is used, and the LED turns ON or OFF to indica

84 35010372 10/2010XBT GT2430Side XBT GT2430 Part IdentificationFrontRearBottomPart DescriptionA Display: displays user created screens and remote equ

35010372 10/2010 85C Status LED:z Green (steady): normal operation (power is ON) or OFFLINE operation.z Orange (steady): backlight burnout is detected

86 35010372 10/2010XBT GT4000 SeriesSide XBT GT4000 series Part IdentificationFrontRear

35010372 10/2010 87Left and RightBottomPart DescriptionA Display: displays user created screens and remote equipment variables.B Touch Panel: performs

88 35010372 10/2010F Auxiliary input/output/voice output interface (AUX). This interface is used for:z External resetz Alarm outputz Buzzer outputz So

35010372 10/2010 89XBT GT5230Side XBT GT5230 Part IdentificationFrontRear

35010372 10/2010 9About the BookAt a GlanceDocument ScopeThis manual describes how to use the Magelis XBT GT, XBT GK, and XBT GH devices.Validity Note

90 35010372 10/2010Left and RightCF Card Cover OpenSide XBT GT5230 Part Identification

35010372 10/2010 91XBT GT5330/5340/5430Side XBT GT5330/5340/5430 Part IdentificationFrontRear

92 35010372 10/2010Left and RightBottomPart DescriptionA Display: displays user created screens and remote equipment variables.B Touch panel: performs

35010372 10/2010 93E Ethernet interface (LAN) (10Base-T/100Base-TX): RJ-45 connector is used, and the LED turns ON or OFF to indicate the current stat

94 35010372 10/2010XBT GT6000 SeriesSide XBT GT6000 series Part IdentificationFrontRear

35010372 10/2010 95Left and RightBottomPart DescriptionA Display: displays user created screens and remote equipment variables.B Touch panel: performs

96 35010372 10/2010D Expansion unit interface: connects expansion units with communication features.E Ethernet interface (LAN) (10Base-T/100Base-TX):

35010372 10/2010 97XBT GT7000 SeriesSide XBT GT7000 series Part IdentificationFrontRear

98 35010372 10/2010Left and RightBottomPart DescriptionA Display: displays user created screens and remote equipment variables.B Touch panel: performs

35010372 10/2010 99E Ethernet interface (LAN) (10Base-T/100Base-TX): RJ-45 connector is used, and the LED turns ON or OFF to indicate the current stat